Yamaha Raptor 700R Parts & Accessories
$64.95
89.95
$129.95
$149.95
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Ship To United States
Kits With H-D 12mm Ends!

American Star Tie Rod Upgrade Kits are a great choice.
Economically priced and quality manufactured. The smaller
factory 10mm tie rod ends that are prone to failure are replaced
Rods, Four (4) Tie Rod Ends along with Jam Nuts, Washers and
Castle Nuts. Available in stock width only.
Size Needed
Size Needed
Size Needed
$69.95
Ship To United States
$69.95
Ship To United States
$29.95
Ship To United States
$44.95
American Star Replacement Tie Rod Ends

You are looking at a set of American Star (OEM) style Four (4) Tie
Rod Ends.  Two (2) Right Hand Thread Tie Rod End and Two (2) Left
Hand Tie Rod Ends.  Only 1 Kit  is necessary to replace both sides.
They fit your stock OEM Tie Rods and all after market Tie Rods that
utilize your stock ends. With OEM stock replacement ends running
as much as 50.00 each per end, these ends are a really
outstanding deal!
$699.95
$799.95
Ship To United States
$469.95
American Star MX PRO Racing A-Arms
American Star MX PRO Camber/Caster Racing A-Arms are
manufactured out .083 Wall One Inch 4130 Chromoly Aircraft Grade
Steel. They are CNC bent and shaped and then precision TIG welded
by our Certified Welders. There is a Gusset Plate added to the
bottom of the A-Arm for added strength and to protect the shock
from damage. They come complete with all hardware shown in the
picture on the left. Please click on the picture for a closeup view.
This Arm takes a stock length shock and is available in a +2 Inch
configuration Widening your bike a total of 4 inches overall.
$469.95
American Star PRO X Racing A-Arms
American Star PRO X Camber/Caster Racing A-Arms are
manufactured out .083 Wall One Inch 4130 Chromoly Aircraft Grade
Steel. They are CNC bent and shaped and then precision TIG welded
by our Certified Welders. There is a Gusset Plate added to the
bottom of the A-Arm for added strength and to protect the shock
from damage. They come complete with all hardware shown in the
picture on the left. Please click on the picture for a closeup view.
This Arm takes a stock length shock and is 2 inches wider each
side for a total of 4 inches overall. Designed for maximum travel,
this arm comes with our MAX Travel Chromoly Heim Ball Joints.
Lifetime Structurally warranted.
$499.95
Solution Graphics
Size Needed
Size Needed
Size Needed
Size Needed
Color Needed
Size Needed
Color Needed
Size Needed
Color Needed
Size Needed
Color Needed
Size Needed
Color Needed
American Star PRO X Racing A-ArmPackage
American Star PRO X Camber/Caster Racing A-Arms are
manufactured out .083 Wall One Inch 4130 Chromoly Aircraft Grade
Steel. They are CNC bent and shaped and then precision TIG welded
by our Certified Welders. There is a Gusset Plate added to the
bottom of the A-Arm for added strength and to protect the shock
from damage. They come complete with all hardware shown in the
This Arm takes a stock length shock and is 2 inches wider each
side for a total of 4 inches overall. Designed for maximum travel,
this arm comes with our MAX Travel Chromoly Heim Ball Joints.
Lifetime Structurally warranted. Includes Speedline'z Brake Lines
and Upgraded 12mm Tie Rod Ends.
Color Needed
American Star MX Tie Rods and Ends

These Lifetime Structurally Warranted 4130 Chromoly Tie Rods
are the very best in the industry today. The High Quality Sealed Tie
Rod Ends are 12mm Male ends. This set upgrades your 10mm tie
rod ends that are prone to failure to a much heavier duty 12mm
rod end assembly. Raptor 700 owners this is the answer to not
braking ends. We Guarantee It! Each kit includes two (2) Lifetime
Jam Nuts, Washers and Castle Nuts. Available in Stock, +1, +2 and
+3 lengths.
American Star PRO X-Series Racing Tie Rods
With Chromoly Ends
ASR  PRO X-SERIES RACING TIE RODS manufactured out of
Precision Formed, Seamless, Heat Treated .120 Wall 5/8 inch
Aircraft Grade Steel Tubing With Precision TIG Welded 304
Stainless Steel Threaded Ends. The Precision Self Lubricating
4130 Chromoly Teflon/Kevlar Lined Heim Ends are rated at 16,238
Yamaha owners  these replace your weak stock style tie rods and
rod ends. With most OEM tie rod ends being about 45.00 each (x4)
you can see why these are the best deal out there. This is our
VERY BEST and STRONGEST Racing Tie Rod Set! Available in
Stock, +1, +2 and +3 lengths.
Speedlinez Stainless Steel "2 Line" Racing Front
Brake Line Kit
Superior Quality Braided Stainless Steel PFTE Lined Front ATV
Racing Brake Lines. These are the very best quality lines on the
market today. By attaching at the Brake Reservoir with a Double
Banjo Bolt the Front lines T-Block is eliminated.  These lines will
dramatically improve your braking by eliminating pressure line
flex and improving brake modulation by firming up the pull at the
brake lever or pedal. Additionally they carry more fluid which
enhances cooling and have a burst pressure 3 times greater than
that of a rubber brake hose. You won't get a better set of Brake
Lines at twice the price. SPEEDLINE'Z guarantee's it! All
SPEEDLINE'Z Brake Lines have a lifetime warranty.i
Speedline'z "3 Line" Front Brake Line Kit
These 3 Piece Lines are the very best quality lines on the market
today. These lines will dramatically improve your braking by
eliminating pressure line flex and improving brake modulation by
firming up the pull at the brake lever or pedal. Additionally they
carry more fluid which enhances cooling and have a burst
pressure 3 times greater than that of a rubber brake hose. You
won't get a better set of Brake Lines at twice the price.
SPEEDLINE'Z guarantee's it!
All
SPEEDLINE'Z Brake Lines have a lifetime warranty to the
original purchaser.
Speedlinez Braided Stainless Steel Rear Racing
Brake Lines
You are looking at American Stars SPEEDLINE'Z Superior Quality
DOT Approved Braided StainlessSteel PFTE Lined Rear ATV Racing
Brake Lines. These are the very best quality ATV Brake Lines on
the market today GUARANTEED! These lines will lever or pedal.
Additionally they carry more fluid which enhances cooling and have
a burst pressure 3 times greater than that of a rubber brake hose.
All
SPEEDLINE'Z Brake Lines have a lifetime warranty.
American Star Yamaha Raptor 660 Chromoly
Racing Swing-Arm
American Star Elliptical Tube 4130 Chromoly Racing Swing-Arms
are without a doubt the very best built, very best looking
Swing-Arms in the industry today. Super strong, they are
manufactured out of Oval Tube .095 wall 4130 Aircraft Grade
Elliptical Chromoly Tubing. Notice 4 Bolt Pinch Tubes at the rear.
They are available with or without skid plates and in Lite-Weight.
.065, Standard .095 and Heavy Duty .120 configurations In Stock up
to plus 12 inch configurations. Please tell us the length you need
when you order. Your Stock Bearing Carrier Will NOT This
Swing-Arm. Requires a round housing carrier like seen below.
Racing Swing-Arm
American Star Elliptical Tube 4130 Chromoly Racing Swing-Arms
are without a doubt the very best built, very best looking
Swing-Arms in the industry today. Super strong, they are
manufactured out of Oval Tube .095 wall 4130 Aircraft Grade
Elliptical Chromoly Tubing. Notice 4 Bolt Pinch Tubes at the rear.
They are available with or without skid plates and in Lite-Weight.
.065, Standard .095 and Heavy Duty .120 configurations In Stock up
to plus 12 inch configurations. Please tell us the length you need
when you order. Your Stock Bearing Carrier Will NOT This
Swing-Arm. Requires a round housing carrier like seen below.
Ship To United States
American Star PRO X Long Travel Racing A-Arms
American Star PRO X Long Travel Camber/Caster adjustable
Racing A-Arms are manufactured out .083 Wall One Inch 4130
Chromoly Aircraft Tubing. They are CNC bent and shaped and then
precision TIG welded by our Certified Welders.. There is a Gusset
Plate added to the bottom of the A-Arm for added strength and to
protect the shock from damage. They come complete with all
hardware shown in the picture on the left. These arms 3 inches
wider each side for a total of 6 inches overall. Designed for
maximum travel, this arm comes with our 28,800lb rated MAX
Travel Chromoly Heim Ball Joints. This arm takes a longer than
stock 18.25 inch aftermarket racing shock. The A-Arms have a
lifetime structural Warranty too.
American Star Chromoly Racing Tie Rods

American Star Heavy Duty 4130 Chromoly Racing Tie Rods are
available in Stock, +1, +2, +3 and +4 lengths. T
he Female Style Tie
Rods
are precision manufactured out of Precision Formed,
Seamless Heat Treated .120 Wall 5/8 inch Tubing  with Precision
machined 304 Stainless Steel 10.125mm or 12.125mm external
Threaded Ends TIG Welded in. These will take your stock tie rod
ends. All American Star Racing Tie Rod Sets are lifetime
structurally warranted against bending or breaking. Be sure to
select the size you need when ordering. Available in Stock, +1, +2
and +3 lengths.
AMERICAN STAR Happily Ships Worldwide Daily. If You Reside Outside Of The USA, Please Contact Us For Shipping Rates Before You Order.
Ships FREE USPS
Priority Worldwide
$569.95
WE ARE CURRENTLY WORKING ON OUR WEBSITE - PLEASE CALL US TO ORDER 435-562-4386